• HLK-RM04 Serial wifi Dual Ethernet UART to WIFI Module
  • HLK-RM04 Serial wifi Dual Ethernet UART to WIFI Module
  • HLK-RM04 Serial wifi Dual Ethernet UART to WIFI Module
  • HLK-RM04 Serial wifi Dual Ethernet UART to WIFI Module

HLK-RM04 Serial wifi Dual Ethernet UART to WIFI Module

SKU
MDL.1216
Customer #
MOQ
10
Packaging
1pcs/lot
Unit Price
RFQ
Unit Price
from $0

Payment Accepted

Wholesale

Prices

50+ RFQ
<50 RFQ
20+ RFQ
200+ RFQ

Buyer Protection

  • Full Refund if you don't receive your order
  • Full or Partial Refund, if the item is not as described

Description
HLK-RM04 is UART-ETH-WIFI module. It based on the universal serial interface and conform to the
standard of network embedded module.Built-in TCP/IP protocol stack. that between the three interfaces
(UART Ethernet WIFI)are able to achieve transparent conversion at will.
Through the HLK - RM04 module,The traditional serial device in the case of don't need to change any configuration.
Can through the Internet network transmit their own data.It provide a solution for users that Serial Device transmit data through Ethernet quickly.

Features:

1. UART to WIFI Wireless Module?UART to Ethernet Module Ethernet to WIFI Module UART server module?Make your Serial Device connected to the Internet easily. Double Data Rate All transparently. Guarantee the highest limit of Usability and Compatibility.
2. The module integrated 10/100 m adaptive Ethernet interface.The highest baud rate up to 230.4 Kbps of the serial communication.and the highest rate of TTL
serial port is 500KBPS.
3. Each module in strict test and power correction,Ensure consistency of product.
4. The free conversion of double serial ports?double Ethernet ports and WIFI .Catering toyour extensive demands. 802.11 b/g/n WIFI support.
5. Size:40*29(A third small than a credit card)
6. Operating Temperature:
Industry: -25~75°C
7. Built-in 360MB MIPS CPU , 16M RAM ,4M FLASH ,Wireless baseband,RFFE,and a variety of peripheral bus.
8. Support the IEEE 802.11 b/g/n.Support transparent protocol data transmission mode.
9. Support General encryption methods and algorithms of WIFI ,WEP/WAP-PSK/WAP2-PSK/WAPI,Encryption type:WEP64/WEP128/TKIP/AES.
10.Provide the AT + instruction set configuration,Provide friendly Web configuration page,configured via Web.
11.HLK - EM04 module optional built-in onboard or external antenna.
12.Support WIFI work in AP model and node mode,The real hardware AP,Supports iphone and all android phones connected WIFI. Supports AP and station simultaneous online.
13.13.Optional TCP Server/TCP Client/UDP mode,Support network protocols:TCP/UDP/ARP/ICMP/HTTP/DNS/DHCP.
14.Support DHCP to automatically obtain IP,Support when work in AP mode assigned IP from the device.
15.The rate of serial port is adjustable,1200-230400.


Package includes:

1 X HLK-RM04 module

1 X WIFI Test board




1.jpg


========================================================================================


Type HLK-RM04
Supported Standards and Protocols
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, NAT, PPPoE
PORTWAN10/100 m adaptive RJ45 port *1

LAN10/100 m adaptive RJ45 port *1
Wireless parameterFrequency Range2.4~2.4835GHz

Transmission 
rate
11n:270/243/216/162/108/81/54/27Mbps
135/121.5/108/81/54/40.5/27/13.5Mbps
130/117/104/78/52/39/26/13Mbps
65/58.5/52/39/26/19.5/13/6.5Mbps


IEEE 802.11g :54/48/36/24/18/12/9/6(self-adaptive )


IEEE 802.11b:11/5.5/2/1M(self-adaptive )

Working channels13

Spread spectrumDSSS

Data ModulationDBPSK, DQPSK, CCK and OFDM(BPSK/QPSK/16-QAM/64-QAM)

Sensitivity @ 
PER
1500M:-68dBm@10% PER;
130M:-68dBm@10% PER;
108M:-68dBm@10% PER;
54M:-72dBm@10% PER
11M:-85dBm@8% PER;
6M:-88dBm@10% PER
1M:-90dBm@8% PER;(Typical values)

Transmission 
distance 
Indoor up to 100m; 
Outdoor up to 360m.(Depending upon the environment)

RF Power≥14.5dBm (11n)/ ≥16.5dBm(11b/11g)EIRP

AntennaOn-board antenna or external antenna
Network Media10Base-T:≥ Category 3 UTP   100Base-TX:Category 5 UTP
WIFI ' s Job typer
Client/AP/Route
QoS ManagementSet the uplink bandwidth management
Set the downlink bandwidth management
System ServiceVirtual server: set up internal server to provide the Internet user  to access
DMZ: When you need to set up virtual server open port is uncertain, you can set it to the DMZ host.
Port Triggering:Wireless router can based on LAN port access to the Internet to automatically open inward service port
Device Management 
Locale
The NTP server Settings
Backup system setup information
Set up information to recover from a file
Restore to factory settings 
Software Update 
Remote Management 
Restart
Change Password
WLAN Security Mode
Open System
WPA-PSK
WPA2-PSK
WPAPSK
WPA2PSK
WPA1WPA2
UART to Network
Maximum Transfer Rate
230400bps
TCP ConnectionMax Connections >20
UDP ConnectionMax Connections >20
SERBAUD50~230400bps
Other Parameter
Status LightStatus Indication
Environmental StandardsOperating Temperature:-20-60 centi-degree 
Operating Humidity:10%-90%RH(non-condensing)
Storage Temp:-40-80 centidegree 
Storage Humidity:5%-90%RH(non-condensing)
Other Properties

Spectrum bandwidth:20MHz,40MHz,Automatic


========================================================================================


Note: all the descriptions and prices are subject to change without prior notice.

Free Shipping: No

Shipping Weight/Unit(g): 0.00

Std. Packing Qty. (pcs): 1

Report an Error (Win $10 Prize)