Arduino WIFI wireless shield ESP8266 ESP-13E

Wireless 802.11 b / g / n standards.
Support STA / AP in two modes.
Built-in TCP / IP protocol stack, you can configure a socket.
It supports standard TCP / UDP Server and Client.
Support serial port baud rate: 1200/2400/4800/9600/19200/38400/57600/74800/115200 bps.
Serial Data Bits: 5/6/7/8 bits.
Serial Parity: None.
Serial Stop bits: 1/2 bit.
Standard Arduino UNO, Mega pitch.
Leads Arduino Pin 2/3/4/5/6/7/8/9/10/11/12/13.
Leads ESP8266 GPIO 0/2/4/5/9/10/12/13/14/15/16 / ADC / EN / UART TX / UART RX.
RESET Reset.
KEY multiplex configuration function keys.
Two DIP switches enable Arduino serial port expansion and ESP8266 switch.
WiFi Operating current: continuous transmission: ≈70mA (200mA MAX), Standby: <200uA.
Wireless transmission rate: 110-460800bps.
Operating temperature: -40 ℃ ~ + 125 ℃.
Module Weight: about 20g.

Package includes:

1XESP8266 Web Server Serial Port WiFi Shield Expansion Board ESP-13 Compatible for Arduino UNO R3 MEGA 2560

Note: all the descriptions and prices are subject to change without prior notice.

Free Shipping: No

Shipping Weight/Unit(g): 0.00

Std. Packing Qty. (pcs): 1

Report an Error (Win $10 Prize)